Products 25-36 of 94
Show
BIOLOID AX Compatible Metal F5 Bracket Bioloid, Robotis, Bioloid Bracket, Frame, Bracket, AX-12, AX-12+, Dynamixel, Frame Set
Price: $4.95
Availability: In Stock

    The BIOLOID Compatible Metal F4 Bracket is a aluminum replacement for the standard BIOLOID F4 bracket. 4 tapped holes on the sides of the frame make it easy to mount cable holders and 3D frames. This is the same frame as used in the HR-OS1 Compatible DYNAMIXEL Servos AX-12A AX-18A Two F6 Brackets, One F7 Bracket, and Two AX-Series Servos (AX-12A, or AX-18A) are required to create a dual joint. This product is just the single metal bracket. This frame requires a Hub & Washer, an M3 * 10 bolt, and 4 M2*6 bolts (both bolts can be found in the Nut and Bolt Variety Pack). The AX-12A comes with this hardware, but the AX-18 does not. ...

    BIOLOID Compatible Metal F12 AX Foot (Pair) Bioloid, Robotis, Bioloid Bracket, Frame, Bracket, AX-12, AX-12+, Dynamixel, Frame Set
    Price: $6.95
    Availability: In Stock

      The BIOLOID Compatible Metal F12 Brackets are an aluminum replacement for the standard BIOLOID F12 bracket Pair. These plates make great feet for your next robot. This is the same frame as used in the HR-OS1. Compatible DYNAMIXEL Servos AX-12A AX-18A This product contains 2 plates. Each plate is usually used in conjunction with a dual axis joint, consisting of 1 F5 Bracket, 2 F6 Brackets, 1 F7 Brackets and 2 AX servos. ...

      LiPo/Li-ion Battery Wiring Harness battery, wiring, harness, power, dean plug, barrel plug, battery link, lipo battery harness, lipo harness
      Price: $8.95
      Availability: In Stock

        Easily link your project to a LiPo/Li-ion battery with the Battery Wiring Harness! This harness is the same one we use in our Hexapod and Quadruped kits. Just attach the male Dean connector to any of our LiPo/Li-ion Batteries and the barrel jack plug into your project, and you're ready to go! The harness even has a built in switch to quickly shut down power to your project. The switch is easily mountable - just cut a 6mm hole into your project and use the included nut and washer to securley fasten the switch to your chassis. The standard 2.1*5.5 male barrel jack connection will fit any 2.1*5.5 female barrel jack connection, such as Arduino/Geekduino Boards, a Female Pigtail Lead or the AX/MX Power Hub. Alternativley, you can just cut of...

        Power Supply 6VDC 2.0A - US Power Supply 6VDC 2.0A, Power Supply, 6VDC, 2 amp
        Price: $9.95
        Availability: In Stock

          Power Supply for general project use.North American Style Plug6VDC, 2 Amp, Center Positive Polarity, 5.5x2.1MM

          Bioloid Frame FP04 F55 Cable Holder 20-Pack Bioloid, Robotis, Bioloid Bracket, Frame, Bracket, AX-12, AX-12+, Dynamixel, Frame Set, FP04, F55, Cable, Holder
          Price: $5.95
          Availability: In Stock

            Bioloid FP04-F55 Cable Holder 20-Pack, used in the Bioloid Premium Robot Kit. Perfect for tidying up your next Dynamixel project's cables and keeping them from being pinched in robot joints!

            1-8S LiPo Battery Voltage Tester/Monitor LiPo Battery Tester, LiPo Battery Monitor, Battery Monitor, 1-8s
            Price: $12.95
            Availability: In Stock

              Managing your LiPo battery is a must. If you let your battery get to low you can diminish the capacity of your battery or even render it unusable. That's where our 1-8S LiPo Battery Voltage Tester/Monitor comes in. First, this unit can be used to test your battery's voltage. It will display the total voltage of your battery, then cycle through and display the voltage of each individual cell. Secondly, the unit will monitor your battery and sound an alarm when one if its cells falls below a preset voltage. You can use the unit's pushbutton to set that voltage anywhere from 2.7-3.8V, or turn it off completely. This monitor mode will only work for 2-8 cell batteries. The unit's pins are spaced at the standard .1"/2.54mm, so they will plug...

              7v5A Power Supply
              Price: $11.95
              Availability: In Stock

                7VDC, 5 Amp Power Supply for general project use. Center Positive Polarity, 5.5x2.1MM barrel jack.

                12V 2A DC Power Supply
                Price: $10.95
                Availability: In Stock

                  Power Supply for general project use. North American Style Plug 12VDC, 2 Amp, Center Positive Polarity, 5.5x2.1MM PS - You might want one of these too.

                  Power Supply 12V - 5A (2.1mm Jack) Power Supply 12VDC 5.0A - US
                  Price: $19.95
                  Availability: In Stock

                    Power Supply for general project use. North American Style Plug 12VDC, 5 Amp, Center Positive Polarity, 5.5x2.1MM PS - You might want one of these too.

                    AX-12A Gear Set AX-12A Gear set, Bioloid Gear set, AX-18A gear set, AX-12 gears, AX-18 gears
                    Price: $5.90
                    Availability: In Stock

                      Are you having problems with your DYNAMIXEL AX-12A because of worn out gears? The AX-12A Gear Set will get your AX-12 servos functioning in no time! Check out the video below to see how easy it is to replace your gears. Includes: AX-12A Gear #1(plastic) : 1 piece AX-12A Gear #2(plastic) : 1 piece AX-12A Gear #3(plastic) : 1 piece AX-12A Gear #4(plastic) : 1 piece AX-12A Wheel Gear(plastic): 1 piece Exclusive Grease: 1 piece NOTE:These gears are NOT compatible with AX-12+/AX-18F/AX-18A Actuators. ...

                      AX-18A Gear Set AX-12A Gear set, Bioloid Gear set, AX-18A gear set, AX-12 gears, AX-18 gears
                      Price: $9.90
                      Availability: In Stock

                        Are you having problems with your DYNAMIXEL AX-18A because of worn out gears? The AX-18A Gear Set will get your AX-18 servos functioning in no time! Check out the video below to see how easy it is to replace your gears. Includes: AX-18A Gear #1(plastic) : 1 piece AX-18A Gear #2(plastic) : 1 piece AX-18A Gear #3(plastic) : 1 piece AX-18A Gear #4(aluminum) : 1 piece AX-18A Wheel Gear(plastic): 1 piece Exclusive Grease: 1 piece NOTE:These gears are NOT compatible with AX-12+/AX-18F Actuators/AX-12A. ...

                        FR07-B101K Back Frame Set RX-28, Bracket, Frame, FR07-B101K, Robotis, Dynamixel, RX-24F, Back, MX-28
                        Price: $29.90
                        Availability: In Stock

                          The FR07-B101K Back Frame Set provides a mounting pattern on the side or bottom of RX-24F , RX-28 and MX-28 DYNAMIXEL servos. It is used in a wide variety of applications and is generally mounted on the rear side of the DYNAMIXEL. Kit Contents:1 x FR07-B101K (Black)8 x M2.5*6 Bolts