Products 73-84 of 94
Show
arbotiX Robocontroller Starter Kit arbotix, robot controller, starter kit, robocontroller, bioloid, ax-12, robotis, ax-12+
Price: $125.95
Availability: In Stock

    The arbotiX Robocontroller Starter Kit provides everything you need to get started with this powerful new robotics controller. Do you want to free your robot of wires? Send sensory data back to your PC? Control your robot from up to 300 feet away without having to worry about interference issues inherit in most 2.4ghz technology? XBee technology is the answer. From simply 'cutting' your serial cable, to creating a wireless mesh network perfect for swarm robotics, you can take your robotics projects to the next level with XBee! [1x] ArbotiX RoboController 16MHz AVR microcontroller (ATMEGA644p). 2 serial ports, 1 dedicated to Bioloid servo controller, the other to the XBEE radio/FTDI programming 3 TTL DYNAMIXEL 3-pin style ports onboard,...

    AX/MX Power Hub 3/4 view
    Price: $7.95
    Availability: In Stock

      The 6 Port RX/EX Power Hub is a must have accessory for any DYNAMIXEL user working with 4-pin servos.  The DYNAMIXEL communication bus allows you to daisy chain multile servos, making wiring a breeze. However sometimes you need to split your DYNAMIXEL chain into multiple directions. Just plug a 4-Pin Dynamixel Cable from your controller to any port on the hub, and you'll have 5 ports available for DYNAMIXEL's 4-pin servos. This hub has the added benefit of 2 power breakouts. You can plug in bare wire with the screw terminal block, or plug in power through the DC barrel jack. The 2.1*5.5 female barrel jack will accept any of our SMPS power supplies as well as our Battery Wiring Harness. The RX/EX Power Hub is compatible with the...

      3 Pin DYNAMIXEL Cable Variety Pack 3 pin dynamixel cable variety pack, dynamixel cable pack, dynamixel cable variety pack, 3pin variety pack, 3 pin variety pack, bioloid cable pack, bioloid cables, bioloid cable variety pack
      Price: $49.95
      Availability: In Stock

        The 3 Pin DYNAMIXEL Cable Variety Pack is a great solution to building upon your existing, or creating a new project! The pack includes 5 different lengths of 3 pin cables- 60mm, 100mm, 150mm, 200mm, and 250mm.The 3 Pin DYNAMIXEL Cable Variety Pack is compatible with the following servos: AX-12A AX-18A AX-12W MX-28T MX-64T MX-106T

        ArbotiX-Pro Robocontroller Starter Kit ArbotiX, Pro, Robocontroller, Starter, Kit, interbotix, robot, controller, microcontroller, arduino, atmel, robotis, dynamixel
        Price: $199.95
        Availability: On Hold

          Get going with the ArbotiX-Pro Robocontroller Starter Kit! This kit contains an ArbotiX-Pro Robocontroller, an AX/MX Power Hub, 10 200mm Dynamixel Compatible Cables, a USB-A to Micro cable, and a 12V 10A Power Supply. The Arbotix-Pro is a robotics subcontroller based around the STM32F103 Cortex M3 ARM cpu. It has support for both TTL or RS-485 communciation, to control AX, MX, and Dynamixel-PRO actuators from ROBOTIS. Interface to the main CPU of a robot is provided via USB, Xbee, or UART, all of which are on dedicated serial ports and can be used simultaneously for other comms. The Arbotix-Pro ships with a CM-730 compatible firmware, which enables the subcontroller to be recognized as an ID 200 Dynamixel device, complete with register...

          Dynamixel 60mm 4 Pin Cable 10 Pack
          Price: $19.42
          Availability: In Stock

            Dynamixel 100mm 4 Pin Cable 10 Pack
            Price: $21.18
            Availability: In Stock

              Dynamixel 140mm 4 Pin Cable 10 Pack
              Price: $22.94
              Availability: In Stock

                Dynamixel 180mm 4 Pin Cable 10 Pack
                Price: $24.70
                Availability: In Stock

                  Dynamixel 200mm 4 Pin Cable 10 Pack
                  Price: $26.48
                  Availability: In Stock

                    Dynamixel 240mm 4 Pin Cable 10 Pack
                    Price: $28.24
                    Availability: In Stock

                      AX/MX Power Hub 3/4 view
                      Price: $4.95
                      Availability: In Stock

                        The 6 Port AX/MX Power Hub is a must have accessory for any DYNAMIXEL user. This little board is a Bioloid 6 Port Hub and a SMPS adaptor all in one! The DYNAMIXEL communication bus allows you to daisy chain multile servos, making wiring a breeze. However sometimes you need to split your DYNAMIXEL chain into multiple directions. Just plug a 3-Pin Dynamixel Cable from your controller to any port on the hub, and you'll have 5 ports avaialble for DYNAMIXEL servos. This hub has the added benefit of 2 power breakouts. You can plug in bare wire with the screw terminal block, or plug in power through the DC barrel jack. The 2.1*5.5 female barrel jack will accept any of our SMPS power supplies as well as our Battery Wiring Harness. The AX/MX Power...

                        60mm Bioloid Dynamixel Cable
                        Price: $10.90
                        Availability: In Stock

                          It’s happened to the best of us. Maybe your cat attacked your latest robot, or maybe you tried to stretch the cable just a little too far. Or maybe, you just need cables for your latest custom creation. No matter what you need them for, these Heavy Duty 3 Pin DYNAMIXEL Compatible Cables will get your project back up to speed in no time. These cable's silicone housing will take the toughest punishment and stand the test of time. And with our custom black cable headers, your robot will look better than ever! If you're building a robot with complex joints, such as the HR-OS1, you know how tightly you have to stretch the 60mm cables to get around the edges of the servos. You're often stuck between a bracket and a hard place. With these 65mm...