Products 1-5 of 5
Arbotix M Robocontroller
Price: $39.95
Availability: In Stock

    The ArbotiX-M Robocontroller is at the heart of every Interbotix Robot. This versatile robot controller is an advanced control solution for BIOLOID and DYNAMIXEL based actuators. As an Arduino compatible microcontroller the Arbotix Robocontroller also benefits from a huge open source community of libraries and examples. Since its release in 2010 the Arbotix has quickly become a favorite among builders worldwide from hobby to high level research. The 'M' in ArbotiX-M stands for mini - this new board is over 25% smaller than the original ArbotiX! The changes from the ArbotiX to the ArbotiX-M are as follows: A smaller footprint(61mm X 61mm) 10 more general purpose I/O pins Barrel Jack for DC Power Separate Power Bus for 4 PWM Digital outputs...

    Arbotix Pro Robocontroller
    Price: $149.95
    Availability: In Stock

      The Arbotix-Pro is a robotics sub-controller based around the STM32F103 Cortex M3 ARM microprocessor. It functions as a ‘brain stem’ to a main CPU, allowing users to interface to servos, sensors, lower level communication buses such as TTL serial or I2C, and power all through one convenient USB connection and communication protocol.The Arbotix-Pro is built around using Dynamixel Robot actuators and has support for both TTL or RS-485 communication, to control AX, MX, and Dynamixel-PRO actuators from ROBOTIS. Power to the Dynamixels can be controlled independently via a dedicated power mosfet, allowing for power saving while in standby modes or power-cycling of servos in case of shutdown or error.The Arbotix-Pro ships with a firmware which...

      arbotiX Robocontroller Starter Kit arbotix, robot controller, starter kit, robocontroller, bioloid, ax-12, robotis, ax-12+
      Price: $125.95
      Availability: In Stock

        The arbotiX Robocontroller Starter Kit provides everything you need to get started with this powerful new robotics controller. Do you want to free your robot of wires? Send sensory data back to your PC? Control your robot from up to 300 feet away without having to worry about interference issues inherit in most 2.4ghz technology? XBee technology is the answer. From simply 'cutting' your serial cable, to creating a wireless mesh network perfect for swarm robotics, you can take your robotics projects to the next level with XBee! [1x] ArbotiX RoboController 16MHz AVR microcontroller (ATMEGA644p). 2 serial ports, 1 dedicated to Bioloid servo controller, the other to the XBEE radio/FTDI programming 3 TTL DYNAMIXEL 3-pin style ports onboard,...

        ArbotiX-Pro Robocontroller Starter Kit ArbotiX, Pro, Robocontroller, Starter, Kit, interbotix, robot, controller, microcontroller, arduino, atmel, robotis, dynamixel
        Price: $199.95
        Availability: On Hold

          Get going with the ArbotiX-Pro Robocontroller Starter Kit! This kit contains an ArbotiX-Pro Robocontroller, an AX/MX Power Hub, 10 200mm Dynamixel Compatible Cables, a USB-A to Micro cable, and a 12V 10A Power Supply. The Arbotix-Pro is a robotics subcontroller based around the STM32F103 Cortex M3 ARM cpu. It has support for both TTL or RS-485 communciation, to control AX, MX, and Dynamixel-PRO actuators from ROBOTIS. Interface to the main CPU of a robot is provided via USB, Xbee, or UART, all of which are on dedicated serial ports and can be used simultaneously for other comms. The Arbotix-Pro ships with a CM-730 compatible firmware, which enables the subcontroller to be recognized as an ID 200 Dynamixel device, complete with register...

          FTDI Cable 5V FTDI Cable 5V
          Price: $17.95
          Availability: In Stock

            The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this FTDI cable are configured to operate at 5V. The FTDI cable is designed around an FT232RQ, which is housed in a USB A connector. The other side of the cable is terminated with a 0.1" pitch, 6-pin connector with the following pinout: RTS, RX, TX, 5V, CTS, GND (RTS is the green cable and GND is black). This cable has the same pinout and functionality as the FTDI Basic Breakout board; you can use it to program your Arduino Pro & Pro Mini. For use with those boards, align the black and green wires of the FTDI cable with the 'BLK' and 'GRN' labels on the PCB. There are pros and cons to the FTDI...