Products 25-36 of 38
Show
WidowX MX-28 Pan Tilt Kit Pan Tilt Kit, MX-28 Pan Tilt Kit, Dynamixel Pan Tilt, Dynamixel MX-28 Pan Tilt Kit
Price: $499.95
Availability: In Stock
Item #: KIT-PANTILT-28 -

    The WidowX Pan Tilt kit is a mid level pan tilt kit using the wildly popular MX-28 DYNAMIXEL smart servos. With a resolution of 0.088°, rotation range of 360°, stall torque of 25.5 kg·cm, and speed of 55rpm you get tremendous resolution with strong torque. This Pan Tilt Kit provides the raw servos, brackets, and cables needed to build a Pan Tilt turret. (If you need a kit with a controller solution check out the WidowX RoboTurret.) The standoffs are on a 5cm x 5cm pattern which can be mounted...

    ScorpionX MX-64 Pan Tilt Pan Tilt Kit, MX-64 Pan Tilt Kit, Dynamixel Pan Tilt, Dynamixel MX-64 Pan Tilt Kit
    Price: $699.95
    Availability: In Stock
    Item #: KIT-PANTILT-64 -

      The WidowX Pan Tilt kit is a mid level pan tilt kit using the wildly popular MX-64 DYNAMIXEL smart servos. With a resolution of 0.088°, rotation range of 360°, stall torque of 74 kg·cm, and speed of 78rpm you get tremendous resolution with very strong torque. This Pan Tilt Kit provides the raw servos, brackets, and cables needed to build a Pan Tilt turret. (If you need a kit with a controller solution check out the ScorionX RoboTurret.) The standoffs are on a 5cm x 5cm pattern which can be...

      LiPo/Li-ion Battery Wiring Harness battery, wiring, harness, power, dean plug, barrel plug, battery link, lipo battery harness, lipo harness
      Price: $8.95
      Availability: In Stock
      Item #: CBL-HARNESS -

        Easily link your project to a LiPo/Li-ion battery with the Battery Wiring Harness! This harness is the same one we use in our Hexapod and Quadruped kits. Just attach the male Dean connector to any of our LiPo/Li-ion Batteries and the barrel jack plug into your project, and you're ready to go! The harness even has a built in switch to quickly shut down power to your project. The switch is easily mountable - just cut a 6mm hole into your project and use the included nut and washer to securley...

        AX/MX Power Hub 3/4 view
        Price: $7.95
        Availability: In Stock
        Item #: IL-4PHUB -

          The 6 Port RX/EX Power Hub is a must have accessory for any DYNAMIXEL user working with 4-pin servos.  The DYNAMIXEL communication bus allows you to daisy chain multile servos, making wiring a breeze. However sometimes you need to split your DYNAMIXEL chain into multiple directions. Just plug a 4-Pin Dynamixel Cable from your controller to any port on the hub, and you'll have 5 ports available for DYNAMIXEL's 4-pin servos. This hub has the added benefit of 2 power breakouts. You can plug...

          3 Pin DYNAMIXEL Cable Variety Pack 3 pin dynamixel cable variety pack, dynamixel cable pack, dynamixel cable variety pack, 3pin variety pack, 3 pin variety pack, bioloid cable pack, bioloid cables, bioloid cable variety pack
          Price: $49.95
          Availability: In Stock
          Item #: KIT-CBLBIO -

            The 3 Pin DYNAMIXEL Cable Variety Pack is a great solution to building upon your existing, or creating a new project! The pack includes 5 different lengths of 3 pin cables- 60mm, 100mm, 150mm, 200mm, and 250mm.The 3 Pin DYNAMIXEL Cable Variety Pack is compatible with the following servos: AX-12A AX-18A AX-12W MX-28T MX-64T MX-106T ...

            ArbotiX-Pro Robocontroller Starter Kit ArbotiX, Pro, Robocontroller, Starter, Kit, interbotix, robot, controller, microcontroller, arduino, atmel, robotis, dynamixel
            Price: $199.95
            Availability: On Hold
            Item #: KIT-PRO -

              Get going with the ArbotiX-Pro Robocontroller Starter Kit! This kit contains an ArbotiX-Pro Robocontroller, an AX/MX Power Hub, 10 200mm Dynamixel Compatible Cables, a USB-A to Micro cable, and a 12V 10A Power Supply. The Arbotix-Pro is a robotics subcontroller based around the STM32F103 Cortex M3 ARM cpu. It has support for both TTL or RS-485 communciation, to control AX, MX, and Dynamixel-PRO actuators from ROBOTIS. Interface to the main CPU of a robot is provided via USB, Xbee, or UART, all...

              AX/MX Power Hub 3/4 view
              Price: $4.95
              Availability: In Stock
              Item #: IL-3PHUB -

                The 6 Port AX/MX Power Hub is a must have accessory for any DYNAMIXEL user. This little board is a Bioloid 6 Port Hub and a SMPS adaptor all in one! The DYNAMIXEL communication bus allows you to daisy chain multile servos, making wiring a breeze. However sometimes you need to split your DYNAMIXEL chain into multiple directions. Just plug a 3-Pin Dynamixel Cable from your controller to any port on the hub, and you'll have 5 ports avaialble for DYNAMIXEL servos. This hub has the added benefit of...

                Dynamixel Compatible Cables
                Price: $11.90
                Availability: In Stock
                Item #: CBL-BIO100 -

                  It’s happened to the best of us. Maybe your cat attacked your latest robot, or maybe you tried to stretch the cable just a little too far. Or maybe, you just need cables for your latest custom creation. No matter what you need them for, these Heavy Duty 3 Pin DYNAMIXEL Compatible Cables will get your project back up to speed in no time. These cable's silicone housing will take the toughest punishment and stand the test of time. And with our custom black cable headers, your robot will look...

                  200mm 3 Pin DYNAMIXEL Compatible Cables -10 Pack Bioloid 200mm Cable, Dynamixel 200mm Cable, RO-903-0078-000, 3 -pin Dynamixel, Robotis Cable, Bioloid cable, Dynamixel cable, ax-12 cable, ax-18 cable
                  Price: $13.90
                  Availability: In Stock
                  Item #: CBL-BIO200 -

                    It’s happened to the best of us. Maybe your cat attacked your latest robot, or maybe you tried to stretch the cable just a little too far. Or maybe, you just need cables for your latest custom creation. No matter what you need them for, these Heavy Duty 3 Pin DYNAMIXEL Compatible Cables will get your project back up to speed in no time. These cable's silicone housing will take the toughest punishment and stand the test of time. And with our custom black cable headers, your robot will look...

                    DYNAMIXEL compatible cables
                    Price: $14.90
                    Availability: In Stock
                    Item #: CBL-BIO250 -

                      It’s happened to the best of us. Maybe your cat attacked your latest robot, or maybe you tried to stretch the cable just a little too far. Or maybe, you just need cables for your latest custom creation. No matter what you need them for, these Heavy Duty 3 Pin DYNAMIXEL Compatible Cables will get your project back up to speed in no time. These cable's silicone housing will take the toughest punishment and stand the test of time. And with our custom black cable headers, your robot will look...

                      350mm 3 Pin DYNAMIXEL Compatible Cable - Single Cable  Bioloid 350mm Cable, Dynamixel 250mm Cable, RO-903-0078-000, 3 -pin Dynamixel, Robotis Cable, Bioloid cable, Dynamixel cable, ax-12 cable, ax-18 cable
                      Price: $2.95
                      Availability: In Stock
                      Item #: CBL-BIO350 -

                        Sometimes a standard length cable is just too short. You just need cables for your latest custom creation, and a 250mm cable is just too short for this one. Enter the 350mm 3 Pin DYNAMIXEL Compatible Cable. This will get your project back up to speed in no time. This cable's silicone housing will take the toughest punishment and stand the test of time. And with our custom black cable headers, your robot will look better than ever! Specifications BIOLOID/DYNAMIXEL Compatible 1 Cable Custom...

                        500mm 3 Pin DYNAMIXEL Compatible Cable - Single Cable  Bioloid 500mm Cable, Dynamixel 500mm Cable, RO-903-0078-000, 3 -pin Dynamixel, Robotis Cable, Bioloid cable, Dynamixel cable, ax-12 cable, ax-18 cable
                        Price: $3.95
                        Availability: In Stock
                        Item #: CBL-BIO500 -

                          Sometimes a standard length cable is just too short. You just need cables for your latest custom creation, and a 250mm cable is just too short for this one. Enter the 500mm 3 Pin DYNAMIXEL Compatible Cable. This will get your project back up to speed in no time. This cable's silicone housing will take the toughest punishment and stand the test of time. And with our custom black cable headers, your robot will look better than ever! Specifications BIOLOID/DYNAMIXEL Compatible 1 Cable Custom...