Products 13-15 of 15
Show
2.1/5.5mm Jack to 2.5/5.5mm Plug Adapter 2.1/5.5mm Jack to 2.5/5.5mm Plug Adapter
Price: $3.95
Availability: In Stock

    This is an adapter that converts a 2.1/5.5mm Jack into a 2.5/5.5mm Plug. This will adapt our 2.1/5.5mm plug power supplies into a 2.5/5.5mm plug.

    AX/MX Power Hub 3/4 view
    Price: $7.95
    Availability: In Stock

      The 6 Port RX/EX Power Hub is a must have accessory for any DYNAMIXEL user working with 4-pin servos.  The DYNAMIXEL communication bus allows you to daisy chain multile servos, making wiring a breeze. However sometimes you need to split your DYNAMIXEL chain into multiple directions. Just plug a 4-Pin Dynamixel Cable from your controller to any port on the hub, and you'll have 5 ports available for DYNAMIXEL's 4-pin servos. This hub has the added benefit of 2 power breakouts. You can plug in bare wire with the screw terminal block, or plug in power through the DC barrel jack. The 2.1*5.5 female barrel jack will accept any of our SMPS power supplies as well as our Battery Wiring Harness. The RX/EX Power Hub is compatible with the...

      AX/MX Power Hub 3/4 view
      Price: $4.95
      Availability: In Stock

        The 6 Port AX/MX Power Hub is a must have accessory for any DYNAMIXEL user. This little board is a Bioloid 6 Port Hub and a SMPS adaptor all in one! The DYNAMIXEL communication bus allows you to daisy chain multile servos, making wiring a breeze. However sometimes you need to split your DYNAMIXEL chain into multiple directions. Just plug a 3-Pin Dynamixel Cable from your controller to any port on the hub, and you'll have 5 ports avaialble for DYNAMIXEL servos. This hub has the added benefit of 2 power breakouts. You can plug in bare wire with the screw terminal block, or plug in power through the DC barrel jack. The 2.1*5.5 female barrel jack will accept any of our SMPS power supplies as well as our Battery Wiring Harness. The AX/MX Power...